Supply and installation of certified fire door sets across all performance ratings — FD30, FD60, flat entrance, glazed and acoustic. New builds, like-for-like replacements and upgrades, all installed to British Standards with a full installation certificate on completion.
Fire Door Ratings We Install
We supply and install fire doors across all standard performance ratings and building applications — from flat entrance doors in residential blocks to specialist acoustic fire doors in commercial buildings. Every door is a third-party certified product, installed to British Standards.
Whether your project requires a single replacement or a programme of installations across a large portfolio, we provide the same level of specification, installation quality and documentation throughout.
All fire doors we supply are third-party certified — Certifire, BM Trada Q-Mark or equivalent — confirming the product has been independently tested to the required fire resistance standard.
Every installation is carried out in accordance with BS 8214 and the manufacturer's installation specification — the two standards that govern how a certified fire door must be fitted to retain its fire resistance performance.
The two primary fire resistance ratings for most residential and commercial applications. FD30 provides 30 minutes of fire resistance; FD60 provides 60 minutes. We supply and install both ratings to the correct specification for the building type and risk.
Certified flat entrance fire doors for multi-occupied residential buildings — one of the most legally critical door types under the Fire Safety (England) Regulations 2022. Installed with correct seals, closers and ironmongery to the full FD specification.
Fire doors for communal stairwells, corridors and lobbies in residential and commercial buildings — high-traffic locations where door condition and self-closing performance are critical to safe evacuation.
Fire doors on designated escape routes — stairwell entrances, final exit doors and escape corridor doors — installed to the specific requirements of the escape route designation and fire strategy.
Fire doors incorporating certified fire-rated glazing panels — suitable for locations where natural light, visibility or aesthetics are required alongside fire resistance performance. Both integrity-only and integrity-plus-insulation glazing available.
Specialist fire doors providing both fire resistance and acoustic performance — ideal for hotels, residential buildings with mixed use, or any environment where sound attenuation alongside fire protection is required.
Every installation includes the complete fire door set where required — certified door leaf, fire-rated frame, intumescent and smoke seals, certified hinges, door closer and all specified ironmongery — as a complete, warranted assembly.
Where an existing frame is in sound condition and correctly specified, we can supply and fit a certified replacement door leaf as a retrofit — a cost-effective solution where full frame replacement is not required.
From a single door replacement to a full new build programme — we carry out all fire door installation types across all building categories.
Supply and installation of fire door sets on new build residential and commercial developments — working with developers and principal contractors from specification through to completion.
Removal of existing non-compliant or end-of-life fire doors and installation of certified replacements to the same or upgraded specification — the most common installation type.
Replacement of existing standard doors with certified fire door sets — where a building has been assessed and fire doors are required in locations not previously protected.
Installation of a certified fire door leaf into a sound existing frame — a cost-effective option where the frame meets the required specification and is in good condition.
Supply and installation of the complete certified door set — leaf, frame, seals, closers and ironmongery — as a fully warranted fire door assembly to the correct specification.
A fire door is only as good as its certification and its installation. A product that has not been independently tested — or that has been installed incorrectly — will not perform to its rated resistance in a fire.
Independent third-party product certification from Warrington Fire — the most widely recognised fire door certification scheme in the UK.
Third-party certification from BM Trada — recognised across the industry as evidence of tested and independently verified fire door performance.
The British Standard for the installation of fire door assemblies — the authoritative standard governing how a certified product must be fitted.
Issued on completion of every installation — confirming product certification reference, specification and compliance with BS 8214.
Every fire door we supply carries third-party certification — Certifire, BM Trada Q-Mark or equivalent — confirming independent testing to the rated fire resistance standard. We do not install uncertified products.
All installations are carried out in accordance with BS 8214:2016 — the British Standard for the installation of fire door assemblies — and to the manufacturer's installation specification for the specific product.
We issue a full installation certificate on completion of every project, documenting the doors installed, their certification reference, specification, installation standard and compliance status.
In the event of a fire, an enforcement visit or an insurance claim, you need to demonstrate that your fire doors were correctly specified, certified products — and that they were installed correctly. Our documentation provides that evidence.
A clear, well-managed process from initial enquiry through to handover — with full documentation at every stage.
We survey the location, assess the existing conditions and confirm the correct fire door specification for each opening.
We provide a clear itemised quote specifying the certified products, ratings, installation type and scope for each door.
Certified fire door sets are procured to the agreed specification — third-party certified products, correctly rated hardware and seals.
Installation carried out to BS 8214 and the manufacturer's specification — every component correctly fitted, gapped and sealed.
Full installation certificate issued on completion — product certification references, specification and compliance confirmation.
We carry out fire door installations across a wide range of building types and client categories — delivering consistent specification, quality and documentation throughout.
Replacement and upgrade of fire door sets in multi-occupied residential buildings — flat entrance doors, communal doors and escape route doors — to meet current regulatory requirements.
Large-scale fire door installation programmes across residential portfolios — consistent specification, coordinated scheduling and centralised documentation across multiple properties and sites.
New build fire door installation on residential and commercial developments — from specification and procurement through to installation and certification, working to programme and to the project's fire strategy.
We supply and install fire doors across all standard performance ratings — FD30 and FD60 — covering flat entrance doors, communal and corridor doors, escape route doors, fire-rated glazed doors and acoustic fire doors. All products are third-party certified.
Yes. All fire doors we supply are third-party certified products — Certifire, BM Trada Q-Mark or equivalent — and every installation is carried out in accordance with BS 8214 and the manufacturer's installation specification. A full installation certificate is provided on completion.
Yes. Like-for-like replacement is one of our most common installation types. We remove the existing door set and install a certified replacement to the same or upgraded specification, correctly fitted and documented. Where the existing frame is sound, a retrofit leaf replacement may also be an option.
Yes. We work with developers and principal contractors on new build projects — providing specification advice, certified product supply and installation across all fire door types and ratings, working to the project programme and fire strategy.
We issue a full installation certificate on completion of every project, documenting each door installed, its certification reference, product specification, installation standard and compliance status. This forms part of your building's fire safety documentation.
Yes. As a full-service provider we offer FDIS-approved inspections, planned preventative maintenance contracts and remedial works alongside our installation service — providing a complete fire door compliance solution under one roof from day one.